AMX MXD-701 Specifications download pdf (Page 20)

Installation

MXD/T-701 7" Modero X Series® G5 Touch Panels

To install the back box:

1. Prepare the area by removing any screws or nails from the drywall before beginning the cutout process.

2. For best results, use the MXD-701 Installation Template (68-5968-04) to ensure proper placement (FIG. 16). The

template is marked on one side with directions for both landscape and portrait installations to ensure that the touch

panel and back box are properly aligned.

3. After ensuring proper placement, cut out the mounting surface for the back box, using the MXD-701 Installation

Template as a guide.

The maximum recommended torque to screw in the locking tabs on the plastic back

box is 5 IN-LB [56 N-CM]. Applying excessive torque while tightening the tab screws,

such as with powered screwdrivers, can strip out the locking tabs or damage the

plastic back box.

FIG. 16 MXD-701 Installation Template

7 5/16"

6 9/16"

4 1/16"

4 13/16"

(10.32 cm)

(12.22 cm)

(18.50 cm)

(16.67 cm)

Using the included template to select the final placement of the back box is highly

recommended. The outside edges of the template are the same dimensions as the

touch panel, which allows you to troubleshoot possible conflicts with wall edges,

doors, and other potential obstacles.

Making sure the actual cutout opening is slightly smaller than the provided

dimensions is highly recommended. This action provides the installer with a margin

for error if the opening needs to be expanded. Too little wall material removed is

always better than too much.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

No comments

AMX MXD-701 Specifications Page 20