AMX MXD-701 Specifications download pdf (Page 18)

Installation

MXD/T-701 7" Modero X Series® G5 Touch Panels

Installation Recommendations

During any installation, a lack of ventilation may produce conditions that may adversely affect the device’s operation. In

these circumstances, special care must be made to make sure that temperatures within enclosed areas do not exceed the

device’s maximum rated temperature.

MXD-701 Installation

The MXD-701 may be installed directly into a solid surface environment, using either solid surface screws or the

included locking tabs for different mounting options. Once installed, the MXD-701 is contained within a clear outer

housing known as the back box (FIG. 12). This back box is removed when installing the device into a wall or when using

the optional Rough-In Box accessory (FG039-18).

Power Via Power Over Ethernet

Power for the MXD-701 is supplied via Power Over Ethernet (PoE), utilizing an AMX-certified, capacitive touch-

compliant PoE injector or other approved AMX PoE power source. The incoming Ethernet cable should be connected to

the RJ45 port on the MXD-701 (FIG. 13 and FIG. 14).

While the outside temperature of the device may be at or below its maximum

operating temperature, special care must be taken before and during installation to

ensure that the maximum operating temperature is not exceeded within wall or rack

installation spaces.

FIG. 12 MXD-701 Back Box

FIG. 13 Rear of the MXD-701 (Landscape)

Locking tab

RJ45

Port

USB

Port

Top

RJ45

Cable

Clip

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 35 36

No comments

AMX MXD-701 Specifications Page 18