AMX NI-2100 User Manual download pdf (Page 17)

Installation and Upgrading

NI-2100, NI-3100, NI-4100 Hardware Reference Guide

Installation and Upgrading

Installing NetLinx Control Cards (NI-4100 Only)

NetLinx Cards can be installed into the front card slots. The cards mount horizontally through the card

slot openings on the front of the enclosure.

1. Discharge the static electricity from your body, by touching a grounded object.

2. Remove the three screws by turning them in a counter-clockwise direction and then remove the

faceplate (FIG. 7).

3. Align the edges of the card with the internal guide slots and gently slide the card all the way into the

slot (FIG. 8).

4. Carefully apply a small amount of force to insert the cards into their respective connectors. If the

cards have LEDs on them, those LEDs will initiate a lighting sequence to indicate they are receiving

power and are communicating with the Controller.

5. Re-align the faceplate and secure it to the chassis by inserting the three screws by turning them in a

clockwise direction and securing the front plate to the Integrated Controller.

6. Install all rear connectors and apply power.

FIG. 7 NI-4100 front faceplate

FIG. 8 Sample NXC cards inserted into an NI-4100 unit

Thumbscrews

NXC Card Slot faceplate

Card slots

Internal Guide

slots

Sample

NXC cards

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 35 36

No comments

AMX NI-2100 User Manual Page 17