AMX NI-2100 User Manual download pdf (Page 10)

Introduction

NI-2100, NI-3100, NI-4100 Hardware Reference Guide

NI-3100 Specifications

Dimensions (HWD): • 3.47" x 17.00" x 3.47" (8.81 cm x 43.18 cm x 8.82 cm)

• 2 rack units high

Power Requirement: 900 mA @ 12 VDC

Memory: • 64 MB SDRAM

• 1 MB Non-volatile (NV) SRAM

Compact Flash: 128 MB or more

• AMX may increase Flash size at any time in response to market availability

• Upgradeable - see Other AMX Equipment

Weight: 4.55 lbs (2.06 kg)

Enclosure: Metal with black matte finish

Certifications: FCC Part 15 Class B, CE, and IEC 60950

Front Panel LEDs:

• LINK/ACT: Green LED blinks when the Ethernet cables are connected and

terminated correctly. Also blinks when receiving Ethernet data

packets.

• Status: Green LED blinks to indicate that the system is programmed and communi-

cating properly.

• Output: Red LED blinks when the Controller transmits data, sets channels On and

Off, sends data strings, etc.

• Input: Yellow LED blinks when the Controller receives data from button pushes,

strings, commands, channel levels, etc.

• RS-232/422/485: 7 sets of red and yellow LEDs light to indicate that DB9 Ports 1 - 7 are trans-

mitting or receiving RS-232, 422, or 485 data.

• Relay: • Eight-channel single-pole single-throw relay ports

• Each relay is independently controlled.

• Supports up to 8 independent external relay devices

• Channel range = 1-8

• Each relay can switch up to 24 VDC or 28 VAC @ 1 A

Two 8-pin 3.5 mm mini-Phoenix (female) connectors provide relay

termination

• IR/Serial: 8 red LEDs light to indicate the IR/Serial channels 1 - 8 are

transmitting control data on Ports 9 - 16. LED indictor for each IR port

remains lit for the length of time that IR/Serial data is being generated.

• I/O: 8 yellow LEDs light when the rear I/O channels 1 - 8 are active. The LED for

each I/O port reflects the state of that particular port.

Rear Panel Components:

• RS-232/422/485 (Ports 1 - 7): 7 RS-232/422/485 control ports using DB9 (male) connectors with XON/

XOFF (transmit on/transmit off), CTS/RTS (clear to send/ready to send), and

300-115,200 baud.

• ICSNet: 2 RJ-45 connectors for ICSNet interface (provided by optional

ICSNet daughter card).

• ICSHub Out: RJ-45 connector provides data to a Hub connected to the Controller (pro-

vided by optional ICSNet daughter card).

• Relay (Port 8): 8-channel single-pole single throw relay ports with each relay being indepen-

dently controlled and supporting up to 8 independent

external relay devices.

• Digital I/O (Port 17): 8-channel binary I/O port for contact closure with each input being capable of

voltage sensing. Input format is software selectable with interactive power

sensing for IR ports.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Comments to this Manuals

No comments

AMX NI-2100 User Manual Page 10

Comments to this Manuals

Related products and manuals for Serial switch boxes AMX NI-2100