AMX DVX-3156HD-SP Instruction Manual Page 70

  • Download
  • Add to my manuals
  • Print
  • Page
    / 140
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 69
Audio/Video Configuration
58
Enova DVX-315xHD & DVX-215xHD All-in-One Presentation Switchers - Instruction Manual
Video Settings
The Video Out tab enables you to set the resolution, aspect ratio, and picture qualities of each individual video input.
Any changes you make reflect instantaneously on your source input and output devices.
Video Out
FIG. 63 displays the Video Out page for the DVX.
FIG. 63 WebConsole Configuration page - Video Out tab
1 - Output Select: Select the corresponding option button to select the video output to adjust. When you select an output,
the other options on the page change to reflect the output’s current settings. You can copy the settings from one output to
the selected output by using the Copy From menu.
Note: If you have a Virtual device using the same port (5002) as the DVX, all notifications are routed to virtual device
rather than the DVX. In this case, initial states for the video outputs will not be represented in the Web Console. When
possible, avoid using virtual devices on the same port as the DVX.
2 - Blank Color/Logo: Use the drop-down menu to select the color of the blank screen on the output. If you have
uploaded a logo to display on the output, you can also select the logo from this menu.
3 - OSD: This area allows you to activate the on-screen display. When enabled, the input name and resolution displays in
a small box in a corner of the screen whenever you select a new input source. From the available menus in the same
area, you can select the color scheme and location of the OSD.
4 - Select Input: Use the menu to select a video input to be switched to the selected video output.
5 - Logo/Test Pattern: Use the menu to choose an image logo or output test pattern to display on the video output.
Select Off to disable the logo or test pattern and view video from the selected source. You can choose from Off, Color Bar,
Gray Ramp, SMPTE Bar, HiLoTrak, Pluge, and Cross Hatch. If you have uploaded a logo to display on the output, you
can also select the logo from this menu.
6 - Video Mute: Click to toggle whether the video is muted (blanked) on the video output.
Freeze: Click the check box to freeze the current image so that it remains on the screen.
4
1
2
3
7
5
4
6
8
911
10
Page view 69
1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 139 140

Comments to this Manuals

No comments