AMX DVX-3156HD-SP Instruction Manual Page 29

  • Download
  • Add to my manuals
  • Print
  • Page
    / 140
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 28
Wiring and Device Connections
17
Enova DVX-315xHD & DVX-215xHD All-in-One Presentation Switchers - Instruction Manual
LCD Display
During normal operation, the 2 x 20 line LCD display indicates output volume information. The LCD backlight on the
display turns off after 35 seconds of inactivity.
FIG. 12 displays the LCD display.
FIG. 12 LCD display
The LCD Display also displays VIDEO menus (Video Output and Video Input), AUDIO menus (Audio Output, Audio
Input, and Mic Input), SWITCH menu, and STATUS menu selections (see the Audio/Video Configuration section on
page 47 for more information), and indicates current status of any adjustments made to settings within these menus.
SWITCH Pushbutton
Press the SWITCH pushbutton to access the SWITCH menu on the LCD display. Press this button to switch the audio,
video, or both from any input to any output. Press the TAKE pushbutton to implement the switch.
FIG. 13 displays the SWITCH pushbutton.
FIG. 13 SWITCH Pushbutton
TAKE Pushbutton
Press the TAKE pushbutton to implement an audio/video switch while you are in the Switch menu on the LCD display.
When in an audio or video menu, press the button to cycle through audio and video inputs or outputs (depending on the
menu.) This button does not access the menus or change the currently selected menu.
FIG. 14 displays the TAKE pushbutton.
FIG. 14 TAKE Pushbutton
Front Panel LEDs
Label Color Description
LINK/ACT green Blinks when receiving LAN data packets.
STATUS green Blinks to indicate that the system is programmed and communicating
properly.
INPUT yellow Blinks to indicate that the Controller is receiving data.
OUTPUT red Blinks to indicate that the Controller is transmitting data.
RS-232/422/485 red/yellow LEDs indicate that RS-232/422/485 Ports are transmitting or receiving
data.
Red = transmitting data
Yellow = receiving data
RELAYS red Lights to indicate that one or more of the relay channels of the relay
port are currently active (closed).
IR/SERIAL red Lights to indicate that one or more of the IR/Serial channels of the
IR/SERIAL ports are currently transmitting control data.
I/O yellow Lights to indicate that one or more of the I/O channels of the I/O port
are currently active.
Page view 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 139 140

Comments to this Manuals

No comments