AMX NI-3100 Specifications download pdf (Page 77)

WebConsole - System Options

NetLinx Integrated Controllers- WebConsole & Programming Guide (FMv3)

Adding a User-Defined Device

1. Click the Add Device button (in the User-Defined Devices page) to access the Add User Defined Device

page (FIG. 58):

2. Fill in the device information fields, as described in the following table:

FIG. 58 User-Defined Devices - Add User Defined Device

User-Defined Device Information Fields

Address: Enter the address of the physical device in the Address field.

This information can be either the NetLinx Master port value (D:P:S) or an IP Address (#.#.#.#).

Category: Use the drop-down list to select the control method associated with the physical target device

(IR, IP, Serial, Relay, Other).

SDK Class: Use the drop-down list to select the closest Device SDK class type match for the physical target

device. The SDK-Class Types table (below) provides a listing of the available choices.

GUID: Enter the manufacturer-specified device’s GUID (Global Unique Identification) information.

Either the GUID or Make/Model must be specified in this field.

Make: Enter the name of the manufacturer for the device being used (ex: Sony, ONKYO, etc.)

• Up to 55 alpha-numeric characters

• Either the GUID or Make/Model must be specified within this field.

• Spaces in the name will be converted to underscores.

Model: Enter the model number of the device being used (ex: Mega-Tuner 1000)

• Up to 255 alpha-numeric characters

• Either the GUID or Make/Model must be specified within this field.

Revision Enter the firmware version used by the target device.

• Text is required within this field.

• The version must be in the format: major.minor.micro (where major, minor, and micro are

numbers). An example is: 1.0.0 (revision 1.0.0 of the device firmware).

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 159 160

No comments

AMX NI-3100 Specifications Page 77