AMX MET-ECOM Installation Guide download pdf

Installation Guide

MET-ECOM Metreau

™

Entry Communicator

Overview

The MET-ECOM Metreau Entry Communicator (FG2180-01-cc) can be placed at

entry points of homes, condos and hotels to provide audio communications with

anyone at a door or gate - all over IP. Any AMX Modero intercom-enabled touch panel

can interface with the Entry Communicator and allow residents to open doors, gates

and more.

Refer to the Metreau Entry Communicators Operation/Reference Guide (available

online at www.amx.com) for additional installation details and instructions on using the

Configuration Manager, using the full-duplex intercom, and NetLinx Programming

information.

Product Specifications

Rear Panel Components

FIG. 2 shows the location of the rear panel components for the MET-ECOM.

FIG. 1

MET-ECOM Metreau Entry Communicator

MET-ECOM Specifications

Power: • PoE powered – no local Power Supply needed

• IEEE 802.3af Compliant

Front Panel Components: • Integrated Color Video Camera

• Speaker

• Dual Color LED Status Bar: (Yellow/ Red) can be used to

provide feedback, to attract attention for action, or as

general indicator.

• Pushbutton (Doorbell)

• Microphone

Integrated Color Video

Camera:

• QVGA 320 x 240

• Supports Motion JPEG (MJPEG) and H.263 codecs.

• Horizontal viewing angle: 46°

• Vertical viewing angle: 33°

• Adjustable Viewing Angle for Camera: 42°

Speaker: • 8 Ohm, 2W

• 80dB SPL (sound pressure level at 1 meter)

• Meets G.711 sound standard

Microphone: • -40 dB sensitivity, built-in echo cancellation

(telephone quality)

• Full duplex communication

• VoIP Telephony

Rear Panel Components: • Camera Viewing Angle Adjustment

• Ethernet Port - 10/100 Ethernet with PoE. LEDs show

communication activity, connection status, speeds, and

mode information:

SPD (speed) - Green LED lights On when the connection

speed is 100 Mbps and turns Off when the speed is 10

Mbps.

L/A (link/activity) - Orange LED lights On when the

Ethernet cables are connected and terminated correctly,

and blinks when receiving Ethernet data packets.

• ID/Reset pushbutton: Push to set the NetLinx ID (Device

only) assignment for the device. Push and hold for at least

10 seconds to reset to factory default settings.

• Status LED: Green LED provides an indication of both the

system status and communication status with the target

Master. 1 blink every 5 seconds indicates there is

currently active communication between the Metreau unit

and a target Master.

• 2 Multi-Purpose I/Os (5V): 2-channel binary I/O ports for

contact closure with each input being capable of voltage

sensing. Input format is software selectable with

interactive power sensing for IR ports.

Pushbutton (Doorbell)

Speaker

Video Camera

Microphone

Dual Color LED Status Bar (Yellow / Red)

MET-ECOM Specifications (Cont.)

Rear Panel Components

(Cont.):

• 2 Low Voltage Relays (1A/24VDC contact): 2-channel

single-pole single throw relay ports with each relay being

independently controlled and supporting up to 2

independent external relay devices.

Dimensions (HWD): • 5.364” x 3.594” x 1.559”

(13.62 cm x 9.13 cm x 3.96 cm)

Weight: 0.90 lbs (0.408 kg)

Environmental: • Operating Environments: 32º - 104º F (0º - 40º C)

• Storage Environments: 22º - 140º F (-30º - 60º C)

• Heat Dissipation (Typical): 20.5 BTU/hr

Note: The MET-ECOM is weather-resistant and is ideal for

placement in residential outdoor entryways or next to doors

to notify residents that visitors have arrived.

However, please consider the surrounding environment and

avoid installing the unit in a location that will leave the

MET-ECOM directly exposed to the elements. In particular,

avoid prolonged exposure to water.

Mounting: • The MET-ECOM is installed in several ways:

• 4 screws for hard surface mounting

• 2 expansion clips for pressure mounting

• Using the optional Surface Mount Box

Colors Available: • Black MET-ECOM-BK (FG2180-01-BK)

• White MET-ECOM-WH (FG2180-01-WH)

• Polished Brass MET-ECOM-PB (FG2180-01-PB)

• Antique Brass MET-ECOM-AB (FG2180-01-AB)

• Stainless Steel MET-ECOM-SS (FG2180-01-SS)

• Brushed Pewter MET-ECOM-BP (FG2180-01-BP)

Included Accessories: • Installation Kit (KA2180-01) - includes front mount flange,

4 installation screws (#4-40 x 3.12), 2 Phoenix connectors

(female, 3.5mm) and a Ferrite clip.

Other AMX Equipment: • PS-POE-AF Power-over-Ethernet (PoE) power supply

(FG423-80)

• NXA-ENET24 Managed Ethernet Switch

(FG2178-60)

• NXA-ENET24PoE Managed Ethernet Switch, Power Over

Ethernet (FG2178-61)

• Conduit Box Assembly (FG039-12)

• SMB-MET-ECOMS-B/P Surface Mount Box - Black or

Primed for painting (FG039-14-B/P)

Certifications: • FCC Class B

•CE

• IEC60950

•RoHS

FIG. 2 Metreau Entry Communicator (rear panel)

Camera Viewing

Ethernet Connection

2 Multi-Purpose I/Os (5V)

2 Low Voltage Relays

Mounting Slots

(2 on each side)

Mounting Clip

ID/Reset pushbutton

STATUS (green LED)

Angle Adjustment

(1A/24VDC Contact)

1 2

Summary of Contents

Page 1 - MET-ECOM Metreau

Installation GuideMET-ECOM Metreau™ Entry CommunicatorOverviewThe MET-ECOM Metreau Entry Communicator (FG2180-01-cc) can be placed at entry points of

Page 2 - Mounting Specifications

Comments to this Manuals

No comments

AMX MET-ECOM Installation Guide

Browse online or download Installation Guide for Security access control systems AMX MET-ECOM. AMX MET-ECOM Installation guide User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Security access control systems AMX MET-ECOM