Operation/Reference GuideAxcess ControllersAXB-DMX512DMX512 InterfaceLast Revised: 09/25/2012
Configuration and Installation6AXB-DMX512 DMX512 Interface5. Place the front panel of the AXB-DMX512 on the front of the rack over the unit and secure
Configuration and Installation7AXB-DMX512 DMX512 InterfaceThere is a danger of explosion if you replace the battery incorrectly. Replace the battery w
Configuration and Installation8AXB-DMX512 DMX512 Interface
Programming9AXB-DMX512 DMX512 InterfaceProgrammingThe AXB-DMX512 is controlled with Axcess Send_Commands. Use the programming information in this sect
Programming10AXB-DMX512 DMX512 InterfaceDirect Control Buffer Send_CommandsThe direct control buffer is modified by individual output ramps or by pres
Programming11AXB-DMX512 DMX512 InterfacePatch Buffer Send_CommandsThe patch buffer Send_Commands determine which if any DMX inputs modify the patch bu
Programming12AXB-DMX512 DMX512 InterfacePatch Buffer Send_Commands (Cont.)Command DescriptionPCPatches an input to one or more outputs.The list can be
Programming13AXB-DMX512 DMX512 InterfaceGroup Buffer CommandsThe group buffer is modified by changing group commands. The following table lists the Gr
Programming14AXB-DMX512 DMX512 InterfaceGroup Buffer Commands (Cont.)Command DescriptionGCConnects one or more groups to an Axcess level or to a DMX i
Programming15AXB-DMX512 DMX512 InterfaceGroup Buffer Commands (Cont.)Command DescriptionGDRamps down one or more groups at the current ramp rate set b
AMX Limited Warranty and DisclaimerAll products returned to AMX require a Return Material Authorization (RMA) number. The RMA number is obtained from
Programming16AXB-DMX512 DMX512 InterfaceGroup Buffer Commands (Cont.)Command DescriptionGLDeletes DMX outputs from any group.This command removes one
Programming17AXB-DMX512 DMX512 InterfaceGroup Buffer Commands (Cont.)Command DescriptionGPSame as ‘GA’ command, except the DMX outputs are added so th
Programming18AXB-DMX512 DMX512 InterfaceGroup Buffer Commands (Cont.)Command DescriptionGRRamps group to a L level in T tenths of seconds. Ramps a sin
Programming19AXB-DMX512 DMX512 InterfaceGroup Buffer Commands (Cont.)Command DescriptionGT Sets the current ramp rate for one or more groups in tenths
Programming20AXB-DMX512 DMX512 InterfaceAxcess Level Send_CommandsThere are eight levels tied to the Axcess system. The following table lists the Axce
Programming21AXB-DMX512 DMX512 InterfaceAxcess Level Send_Commands (Cont.)Command DescriptionADRamps down one Axcess level at the ramp rate set by the
Programming22AXB-DMX512 DMX512 InterfaceAxcess Level Send_Commands (Cont.)Command DescriptionATSets the ramp rate for one Axcess level in tenths of a
Programming23AXB-DMX512 DMX512 InterfaceMiscellaneous Send_CommandsThe following table lists other miscellaneous Send_Commands. M
Programming24AXB-DMX512 DMX512 InterfaceMiscellaneous Send_Commands (Cont.)Command DescriptionMLDefines the number of output that are transmitted. Lim
Programming25AXB-DMX512 DMX512 InterfaceChannel CommandsThe following table lists the channel commands for the AXB-DMX512: Ramp time is set by the ‘
Table of ContentsiDocument Name HereTable of ContentsProduct Information ...
Programming26AXB-DMX512 DMX512 InterfaceChannel Trigger Send_CommandsAlmost all methods of control using an Axcess system require the use of channels
Troubleshooting27AXB-DMX512 DMX512 InterfaceTroubleshootingThi section addresses and provides solutions to most frequently asked questions. AXB-DM
Troubleshooting28AXB-DMX512 DMX512 Interface
Troubleshooting29AXB-DMX512 DMX512 Interface
9/12 ©2009 AMX. All rights reserved. AMX and the AMX logo are registered trademarks of AMX. AMX reserves the right to alter specifications without n
ii Document Name HereTable of ContentsGZ ...
Product Information1AXB-DMX512 DMX512 InterfaceProduct InformationThe AXB-DMX512 DMX512 Interface creates a bi-directional DMX512 AxLink connection, t
Product Information2AXB-DMX512 DMX512 Interface
Configuration and Installation3AXB-DMX512 DMX512 InterfaceConfiguration and InstallationSetting the Device DIP SwitchThe 8-position DEVICE DIP switch
Configuration and Installation4AXB-DMX512 DMX512 Interface1. Remove the jumper that is on pins 1 and 2 of jumper trios JP4 and JP5. (Pins 1 and 2 are
Configuration and Installation5AXB-DMX512 DMX512 InterfaceUsing AxLink communicationConnect the AxLink wiring to the connector on the AXB-DMX512, as s
Comments to this Manuals