AMX AXP-CPI16 User Manual download pdf (Page 23)

central controllers

374 US SALES AND SUPPORT 800.222.0193 • INTERNATIONAL SALES AND SUPPORT +1.469.624.7400 • www.amx.com

OVERVIEW

TheNetLinxNXC-ME260/64Cardsuppliesoptimumcontrol

systemperformance.Withtheabilitytorespond50times

fasterthanconventionalcontrolmasters,theNXC-ME260/64

ispropelledbythehigh-speed257MIPSColdFireprocessor.

Thestandard32MBCompactFlashmemoryisexpandableto

1GandbeyondandEthernetnetworkingisbuiltonboard.The

NXC-ME260/64alsofeaturesenhancedUsernameandPassword

authentication, HTTPS and SSL certiﬁcate interaction, ICSP

communication and encryption, and use of a pre-installed AMX

SSL certiﬁcate.

FEATURES

•1AxLinkBus

•1Ethernet(TCP/IP)Port

•2ICSNetPorts

•2ICSHubPorts

•257MIPSprocessorspeed

•64MBRAM

•512MBCompactFlash(upgradeableto4G)

•1MBNon-VolatileMemory

NXC-ME260/64

NetLinx Master

Ethernet Card

(FG2010-64)

ENCLOSURE

Metal with black matte ﬁnish

FRONT PANEL COMPONENTS

• Program port: DB9 (male) connector that supports RS-232 communications

to your PC for system programming and diagnostics. Set the port’s

communication speed with the Baud Rate DIP switch. Program ports are

located on the front and rear panels of the Master Card for easy access.

Because these ports share the same circuitry, they should never be used at the

same time; doing so will result in communication and/or programming errors

• Status LED: Green LED blinks to indicate system and communication status

• Output LED: Red LED blinks when the Master Card transmits data, sets

channels on and off, sends data strings, etc.

• Input LED: Yellow LED blinks when the Master Card receives data from button

pushes, strings, commands, channel levels, etc.

• Program Port DIP Switch 8-position DIP switch on the front of the card for

setting the baud rate for the Program port

REAR PANEL

• PWR connector: 2-pin (male) green captive-wire connector for 12 VDC

power supply

• EXPANSION OUT: port RJ-11 connector connects to an AXB-SPE Slave

Port Expander

• Ethernet 10/100 port: The (RJ-45) Ethernet Port default setting automatically

negotiates the connection speed (10 Mbps or 100 Mbps) and whether to use

half duplex or full duplex mode

• Ethernet 10/100 LEDs: Display communication activity, connections, speeds,

and mode information.

• AxLink connector Black 4-pin (male) captive-wire connector that provides

data and power to external control devices. Power rating = 6 A max; actual load

depends on connected power supply

• AxLink Status LED: Green LED blinks to show AxLink and expansion port

data activity

• PROGRAM port: 5-pin (male) gray connector for system programming and

diagnostics. There is a Program port located on the front and rear of the

Master Cards for easy access. Because these ports share the same circuitry,

you should never use both ports at the same time. Doing so will result in

communication and/or programming errors

• ICSNet connectors: Two RJ-45 connectors that provide power (500 mA) and

data to external ICSNet devices

- ICSNet LEDs - Indicate activity on that port.

• ICSHub In/Out connectors: Two RJ-45 connectors that provide data to other

Hubs connected to the Master Card

- ICSHub IN/OUT LEDs - Indicate activity on that port

ENVIRONMENTAL

Heat Dissipation (Typical): 30.7 BTU/hr

INCLUDED ACCESSORIES)

• 2-pin 3.5 mm mini-Phoenix (female) PWR connector (41-5025)

• 4-pin 3.5 mm mini-Phoenix (female) AxLink connector (41-5047)

• 10-pin 3.5 mm mini-Phoenix (female) I/O connector (41-5107)

• Installation Kit (KA2105-01)

• Two 8-pin 3.5 mm mini-Phoenix (female) Relay connectors (41-5083)

• Two CC-NIRC IR Emitters

• Two removable rack ears (62-2105-07)

SPECIFICATIONS

DIMENSIONS (HWD)

• 1 5/16” x 5” x 8 13/16” (3.4 cm x 12.7 cm x 22.4 cm)

• RU: 1

WEIGHT

8.8 oz (250 g)

POWER

750 mA @ 12 VDC

MEMORY

• Compact Flash: 512 MB standard (upgradeable)

• Volatile: 64 MB

• Non-volatile: 1 MB

RECOMMENDED ACCESSORIES DESCRIPTION PART # PAGE #

NXS-MHS Master/Hub Module Shell (FG2009) 376

NXA-CFM CompactFlash Upgrade for NXC-ME260/64 (FG2116-xx) 382

PSN6.5 6.5 Amp Power Supply (FG423-41) 415

PSN4.4 4.4 Amp Power Supply (FG423-45) 414

PSN2.8 13.5 VDC, 2.8 A Power Supply (FG423-17) 414

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 31 32

Comments to this Manuals

No comments

AMX AXP-CPI16 User Manual Page 23

Comments to this Manuals

Related products and manuals for Networking AMX AXP-CPI16