AMX NI-3100 User Manual download pdf (Page 26)

Chapter 2 Installation and Configuration

Caution Do not insert or remove the CompactFlash card while the system is powered on.

Doing so may cause data loss, and in some cases the drive may need reformatting.

Third-party cards may require additional drivers. Contact your

CompactFlash vendor for more information.

Caution The CompactFlash interface is ESD sensitive. An electrostatic shock to the

CompactFlash module while it is inserted may cause the controller to lock up or reboot,

or data loss on a CompactFlash memory card.

Removing a CompactFlash Card

Follow these steps to remove a CompactFlash card:

1. Power down the NI 3100/3110.

2. Remove the locking screw and raise the CompactFlash slot door cover.

3. Push the protruding ejector button. The card should slide forward.

Note If you encounter too much resistance when pushing the ejector button, do not force

the card. Check the card slot for obstructions and try again.

4. Remove the card from the slot.

5. Lower the cover door and replace the locking screw.

1 ... 25 26 27 ... 63

No comments

AMX NI-3100 User Manual Page 26