AMX NXD-CV7 User Manual download pdf

Quick Start Guide

7” Modero Widescreen Video Touch Panels (G4)

For more detailed installation, configuration, programming, file transfer, and

operating instructions, refer to the NXD-CV7/NXT-CV7 Instruction Manual,

available on-line at www.amx.com.

ATTENTION!

Verify you are using the latest NetLinx Master and Modero touch panel firmware

(available from www.amx.com). Verify the TPDesign4 program being used is

Version 2.6 or higher.

Overview

These are the first 7" diagonal Widescreen Color Active video-capable touch

panels in the control and automation industry. These Color Video (CV) panels

display NTSC/PAL/SECAM video formats within variable sized windows. They

include a built-in microphone, speakers, audio/headphone connector, and six

NetLinx programmable pushbuttons (available on NXD models only when

mounted with included Button Trim Ring).

Table Top models use AMX's exclusive SmoothTilt™ technology for effortless

adjustment of the viewing angle.

Each panel is sold only as part of a CV7 Kit which includes both a panel and an

NXA-AVB/ETHERNET Audio/Video Breakout Box (FG2254-10) although the

breakout box can be purchased separately. The following bullets list the two

available Kit configurations:

• NXD-CV7 (FG2258-02K) - 7" Wall Mount Touch Panel Kit

(includes an NXD panel and NXA-AVB/ETHERNET A/V Breakout Box).

• NXT-CV7 (FG2258-01K) - 7" Table Top Touch Panel Kit

(includes an NXT panel and NXA-AVB/ETHERNET A/V Breakout Box).

Specifications

Panel Connectors

FIG. 2 shows the connectors located on the CV7 Modero Video panels. The

Audio/Video RJ-45 connector provides differential audio/video signals between

the touch panel and the NXA-AVB/ETHERNET. This connector routes

Composite video, Stereo (left/right) audio, and microphone audio.

NXA-AVB/ETHERNET Breakout Box

FIG. 3 shows the front and rear connectors on the NXA-AVB/ETHERNET

breakout box. This breakout box can be mounted on either a horizontal flat

surface or in an equipment rack (by removing the front faceplate and securing it

to an optional AC-RK Rack Kit).

FIG. 1 7" Modero Widescreen Video Touch Panels

CV7 Specifications

Dimensions (HWD):

NXD-CV7

(FG2258-02)

NXT-CV7

(FG2258-01)

CB-TP7

(FG035-10)

• Faceplate included: 5.93" x 7.87" x 3.28"

(15.06 cm x 20.00 cm x 8.33 cm)

• Fully raised: 6.86" x 7.96" x 6.93" (17.40 cm x 20.20 cm x 17.60 cm)

Fully lowered height: 3.70" (9.40 cm)

• Conduit/wallbox: 5.47" x 7.23" x 3.40"

(13.90 cm x 18.40 cm x 8.64 cm) (optional)

Power Requirements

(stand-alone CV7):

• Constant current draw: 1.0 A @ 12 VDC (stand-alone)

• Startup current draw: 1.5 A @ 12 VDC (stand-alone)

Power Requirements

(CV7 and BASE/1):

• Constant current draw: 2.4 A @ 12 VDC

• Startup current draw: 3.6 A @ 12 VDC

Minimum power

supply required:

• PSN2.8 Power Supply (FG423-17)

- when used with a stand-alone CV7 unit.

• PSN4.4 Power Supply (FG423-45)

- when a CV7 is connected to a BASE/1. Using accessories can

increase the power draw requirements.

Memory: • 64 MB SDRAM

• 64 MB Compact Flash (upgradable to 1 GB - factory programmed)

Weight: • 4.12 lbs (1.87 kg)

Certifications: • FCC Part 15 Class B and CE

Panel LCD

Parameters:

• Aspect ratio: 16 x 9

• Brightness (luminance): 350 cd/m2

• Channel transparency: 8-bit Alpha blending

• Contrast ratio: 200:1

• Display colors: 256 thousand colors (18-bit color depth)

• Dot/pixel pitch: 0.19 mm

• Panel type: TFT Color Active-Matrix

• Screen Resolution: 800 x 480 pixels (HV) @ 60 Hz frame frequency

• Video format: NTSC, PAL, and SECAM

Viewing Angle: • 100° total viewing angle

• Vertical: + 50° (up from center) and -50° (down from center)

IR Reception Angle: •Horizontal: + 50° (left and right from center)

• Vertical: + 30° (up and down from center)

Supported Audio

Sample Rates:

• 48000Hz, 44100Hz, 32000Hz, 24000Hz, 22050Hz, 16000Hz,

12000Hz, 11025Hz, and 8000Hz.

NXD panel

(WallMount)

NXT panel

(Table Top)

CV7 Specifications (Cont.)

Front Panel: • Light Sensor: Photosensitive light detector for automatic adjustment of

the panel brightness

• Motion Sensor (PIR): Proximity Infrared Detector to wake the panel

when panel is approached

• IR Receiver: 38 KHz and 455 KHz AMX IR frequencies

• Sleep Button: Pushbutton (grey) provides both access to the Setup

and Calibration page and toggles the panel between a "sleep" or

"wake" state

• Microphone: Used for intercom applications (requires the

NXA-AVB/ETHERNET Breakout Box for analog communication)

• Speakers: Stereo output with a frequency response of 500 Hz - 7 KHz

• LEDs: 6 blue LEDs (support On and Off)

- Both the LEDs and pushbuttons are only available when using

the default Button Trim Ring on the NXD panel.

• Buttons: 6 programmable pushbuttons

Rear Connectors: • Mini-USB Connector: 5-pin Mini-USB connector used for

programming, firmware update, and touch panel file transfer between

the PC and the target panel

• Stereo Output Connector: Stereo output through a 3.5mm mini-jack

(for use with external speakers or headphones)

• Ethernet 10/100 Port: RJ-45 port for 10/100 Mbps communication

• USB Connector: Type A USB port connects an external keyboard or

mouse device for use with Virtual PC applications

• Audio/Video Connector: RJ-45 connection for A/V signals (via CAT5)

between the NXA-AVB/ETHERNET Breakout Box and the panel

• Power: 2-pin 3.5 mm mini-Phoenix connector

Operating /Storage

Environments:

• Operating Temperature: 0° C (32° F) to 40° C (104° F)

• Operating Humidity: 20% - 85% RH

• Storage Temperature: -20° C (-4° F) to 60° C (140° F)

• Storage Humidity: 5% - 85% RH

Included

Accessories:

• Installation Kit for NXD-CV7 panels (KA2258-02):

- 2-pin 3.5 mm mini-Phoenix connector (41-5025)

- Two Phillips-head screws (#4-40 x 0.250 Black) (80-0112)

- Three Drywall clips (62-5924-05) and #6 - sheet metal screws

(80-0192)

• Installation Kit for NXT-CV10 panels (KA2258-01):

- 2-pin 3.5 mm mini-Phoenix connector (41-5025)

• Modero Table Top Cable (CA2250-50) provided with all NXT panels

• NXA-AVB/ETHERNET Breakout Box (FG2254-10)

- Provides video/audio distribution to the A/V panel over CAT5 cable

(up to 200’/60.96 m) and accepts either Composite or S-Video

• Trim Ring with button openings (60-2258-16)

(factory installed on NXD models only)

• Trim Ring without button openings (60-2258-21) (NXD models only)

Other AMX

Equipment:

• CB-TP7 Conduit/Wallbox (FG035-10)

• CC-USB (Type A) to Mini-B 5-Wire programming cable (FG10-5965)

• NXA-BASE/1 Battery Base Kit (FG2255-05K):

- battery base and single NXT-BP battery

• NXA-RK7 Rackmount Kit for 7" Wall Mount panels (FG2904-53)

• NXA-WC80211GCF, 802.11g Compact Flash Wireless Card Upgrade

Kit provides wireless Ethernet support (FG2255-07)

• NXT-BP Battery (FG2255-10)

• NXT-CHG Kit (FG2250-50K): single charger and 2 NXT-BP batteries

• PSN2.8 Power Supply (12 VDC) (FG423-17)

• PSN4.4 Power Supply (12 VDC) (FG423-45)

• Upgrade Compact Flash (factory programmed with firmware):

NXA-CFSP128M - 128 MB compact flash card (FG2116-36)

NXA-CFSP256M - 256 MB compact flash card (FG2116-37)

NXA-CFSP512M - 512 MB compact flash card (FG2116-38)

NXA-CFSP1GB - 1 GB compact flash card (FG2116-39)

FIG. 2 Connector layout on the CV7 Touch Panels

PROGRAM

10/100

ETHERNET

KEYBOARD /

MOUSE

AUDIO / VIDEO

PWR

12VDC

Stereo

Audio-Video from

Ethernet

Power

NXA-AVB/ETHERNET

(CAT5)

Keyboard/Mouse

USB connector

Mini-USB

(Program Port)

(CAT5)

Output

1 2

Summary of Contents

Page 1 - Quick Start Guide

Quick Start Guide7” Modero Widescreen Video Touch Panels (G4)For more detailed installation, configuration, programming, file transfer, and operating

Page 2 - Wiring for Balanced Audio

Comments to this Manuals

No comments

AMX NXD-CV7 User Manual

Browse online or download User Manual for TVs & monitors AMX NXD-CV7. Modero CV7 Panels Quick Start Guide

Summary of Contents

Comments to this Manuals

Related products and manuals for TVs & monitors AMX NXD-CV7